Table of Contents
Advertisement
PIP audio
Select the audio source in the Sub mode.
• {Main} - Select audio from the main picture
• {Sub} - Select audio from the sub picture.
PIP reset
Reset all settings in the PIP menu to factory preset values.
•
The PIP function is available only for certain signal source
combinations as shown in the table below.
HDMI1 HDMI2
DVI
DisplayPort VGA MediaPlayer Browser SmartCMS
O
X
X
O
HDMI1
X
O
X
O
HDMI2
X
X
O
O
DVI
O
O
O
O
DisplayPort
O
O
O*
O
VGA
Media
X
X
X
O
Player
X
X
X
O
Browser
X
X
X
O
SmartCMS
PDF
X
X
X
O
Reader
X
X
X
O
Custom
X
X
X
O
CardOPS
(O: PIP function available, X: PIP function unavailable)
•
The availability of the PIP function will also depend on the resolution
of the input signal being used.
Note: Touch function is only for single full screen. Multiple screen touch
event will be incorrect corresponding.
6.2.5. Configuration1 menu
Switch on state
Picture
Panel Saving
RS232 routing
Screen
Boot on source
WOL
Audio
DDC/CI
Light sensor
PIP
P
Human sensor
Power LED light
Con guration 1
Con guration1 reset
Switch on state
Select the display status used for the next time you connect the power
cord.
•
{Power off} - The display will remain off when the power cord is
connected to a wall outlet.
•
{Forced on} - The display will turn on when the power cord is
connected to a wall outlet.
{Last status} - The display will return to the previous power status
•
(on/off/standby) when removing and replacing the power cord.
Panel saving
Choose to enable the panel saving functions and thus reduce the risk of
"image persistence" or "ghost-imaging".
{Cooling fan} - Select for fan speed {Auto} (Default)/{Off}/{Low}/
•
{Medium}/{High}
NOTES:
PDF
Reader
O
X
X
X
X
O
X
X
X
X
O*
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
O
X
O
X
X
O
X
X
O
X
O
X
X
X
O
O
X
X
X
X
O
X
X
X
X
Last status
Action
RS232
Action
O
On
O
O
On
Action
•
The default {Auto} option will start running the cooling fan if
the temperature of 45°C (113°F) is reached and stop running
the cooling fan if the temperature of 44°C (111°F).
•
A temperature-warning message will be shown on the screen if
the temperature reaches 68°C (154°F). All key functions except
[ ] key will then be disabled.
•
Once the temperature reaches 70°C (158°F), the display power
will be shut down automatically.
•
{Brightness} - Select {On} and the image brightness will be reduced
to an appropriate level. The Brightness setting in the Picture menu
Custom CardOPS
will be unavailable when selected.
X
X
•
{Pixel shift} - Select the time interval ({Auto} / {10 ~ 900} Seconds/
X
X
{Off}) for the display to slightly expand the image size and shift
X
X
O
O
the position of pixels in four directions (up, down, left, or right).
O
O
Activating Pixel Shift will disable H Position, V Position and Zoom
X
X
Mode in the Screen Menu.
X
X
RS232 routing
X
X
X
X
Select the network control port.
O
X
Choose from: {RS232} / {CardOPSRS232 (OPS model only)} / {LAN
X
O
-> RS232}.
Boot on source
Choose to select source when boot up.
Input: select input source when bootup.
Playlist: select playlist index for Media player, Browser, PDF player.
0: no play list. Same as switch source from OSD.1~7: playlist number.
WOL
Choose to turn on or off the wake on LAN function.
Choose from : {Off} / { On}
DDC/CI
Choose to turn on or off the DDC/CI communication function. (*VGA
support only)
Select {On} for normal use.
Light sensor (require Ots accessory CRD41 External Sensor
Box)
Choose to turn on or off backlight adjustment according to environment
brightness.
Choose from : {Off} / { On}
Human sensor (require Ots accessory CRD41 External
Sensor Box)
The Human sensor can detect if people approach the display or not.
The display will turn off backlight if detect nothing in setting time.
The display will back to backlight on when people approach it.
The options are:
•
{Off}(Default), {10 Min.}, {20 Min.}, {30 Min.}, {40 Min.}, {50 Min.}, {60
Min.}
Power LED light
Choose to set power indicate LED on or off.
Choose {On} for normal use.
Configuration1 reset
Reset all settings in Configuration1 menu to the factory preset values.
43
Advertisement
Table of Contents
Troubleshooting
