System Configuration; Connection; Power - JVC RM-LP250S User Manual

System Configuration

Connection

The RM-LP250S and the RM-LP250M
communicates to camera(s) via wired ethernet
communication. This is the supported case.
The controllers connects to the cameras and
changes settings on the camera itself. No video
signal processing are done on the RM-LP250S or
the RM-LP250M.

Power

• Use only the DC power adapter supplied with the controller. Do not use any other DC power adaptor
• If using PoE to power the controller, make sure the network switch supports PoE (48V IEEE 802.3af)
• Ensure the PoE provider has sufficient power budget to power the controller. Otherwise it will not
function properly
• Power Consumption: 6 Watts
The RM-LP250S is designed to control one
camera.
The RM-LP250M is designed to control up to 3
cameras at the same time.
Needs to be on same subnet!
Ethernet Ethernet
RM-LP250S
RM-LP250M
8