Eaton HALO Home Quick Start Manual

Quick Start Guide
Smart Outdoor Security - Flood
HALO Home Twin LED Floodlight
1
Install the Smart Outdoor Security Flood in your desired location. (See enclosed instructions sheet.)
1. Light blinks once and then dims down to 5% at 3000K to indicate being unclaimed. It blinks twice on subsequent
power cycles.
Notes:
• Light blinks twice on power up after a factory reset or if it is unclaimed.
• Light blinks once to indicate it has just been claimed. It restores the saved dimming and CCT levels on
subsequent power cycles.
• Light retains state on power cycle for factory reset, unclaimed and ON state.
If light was OFF (using App or schedule), after one power cycle, it restores ON
state prior to OFF . Dimming and CCT will be restored.
Do not use with existing dimmers.
2
Download the HALO Home app to your smart mobile device.
3
Create a user account and validate via email
Note: Skip to Step 4 if you already have the app.
• Enter your email address as your user account name.
• Select a password of at least 8 characters from the mobile
application "register" screen.
4

Adding a floodlight to the app

1. Press "+" on the HALO Home App screen to add the floodlight.*
* At least one HALO Home floodlight (or compatible device) will need to be installed
and powered in order to add it to the HALO Home App device list.
www.eaton.com/HaloHome
5