Safavieh PAT6718 Assembly Instructions

PREPARATION

Before beginning the assembly of the product, make sure all parts are present.

Compare the parts with the package contents list and hardware contents list.

If any parts are missing or damaged, do not attempt to assemble the product.

Tool required for assembly (included): Allen Key.

Step 1: attach right side (D) to the back (A). Then attach

support L (E) and support S (F) to the right side (C) as shown

on the picture by using the Allen Bolt (H1) and tighten with the

Allen Key (H4). Continue with the left side (C) in the same way.

Make sure to tighten all bolts (H1) before you continue with step 2.

Step 2: put the seat (B) inside the chair as shown on the picture

and use the screws (H2) to attach it to the chair by using

a screwdriver .

Table of Contents

Do you have a question about the PAT6718 and is the answer not in the manual?

Renee McCormick

April 14, 2025

how do we order replacement parts for Safavieh model pt6719

Page 1 PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included): Allen Key.
Page 2 Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE MODEL# PAT6718 Please make sure that you have all parts indicated before you Product Dimension: 25.59”W x 24.8”D x 31.89”H begin assembly of this item.
Page 3 PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included): Allen Key.
Page 4 Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE MODEL# PAT6718 Please make sure that you have all parts indicated before you Product Dimension: 35.43”W x 35.43”D x 14.17”H begin assembly of this item.