Care And Storage - Beurer MG 510 To Go Instruction Use

• To remove the handle, please press and hold down the button (3) and at the same time pull the handle (4)
away from the massage head. Then insert the plug-in element (11) in the back of the massage head to
cover the handle attachment mechanism.
• Hold the massage head by the hand knob (9) so that you can guide the massage head securely.
• If you want to reattach the handle (4), first pull out the plug-in element (11) and push the handle (4) back
on until you feel and hear it engage.
• You can use various massage attachments for massaging. To do this, select one of the 4 interchangeable
massage attachments of your choice.
• Screw the attachments onto the massage head in a clockwise direction. To replace or remove the attach-
ments, turn these anti-clockwise.
• Switch on the massager with the on/off button ( ).
• When you press the buttons, a short acoustic signal sounds as confirmation. After this, the current battery
state is displayed for 2 seconds and the massage then starts with the intensity level that was most recently
selected.
• For the warming attachment (5), the application of heat can also be switched on or off by pressing the
button once. Press
the supplied warming attachment (5).
• Use the intensity selection buttons (+/-) to set the massage intensity you want. There are 5 different massage
intensities available. Press the (+) button for a higher intensity. Press the (-) button for a lower intensity.
• Move the device to the part of the body you want to massage. You may be sitting or standing for this and
you can use the device to massage yourself or another person.
• You can change the massage pressure by pressing the massager firmly or more gently.
• After a maximum usage time of 20 minutes, switch the device off and leave it to cool down.
• The device also has an automatic switch-off time of 20 minutes.
• Keep the device dry.
Note
Do not use the massage device just before going to bed. The massage can also have a stimulating
effect and may cause difficulties in getting off to sleep.
WARNING
• The massage must be pleasant and relaxing at all times. Stop the massage or change the position
of the massage device if you find it is painful or unpleasant.
• Do not jam or force any part of your body, in particular your fingers, into the area of the massage
head.

9. Care and storage

Cleaning
First unplug the device and allow it to cool off. Then you can clean it with a cloth which is no more than lightly
moistened. You can also use a mild detergent.
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Do not use the device again until it is completely dry.
Storage
Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend
storing the device in its original packaging.
again to switch off the heat function. The heat function is only available with
17