Advertisement
Assembly Instructions
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free . Please have your owner's manual and serial
number available for reference .
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble your product on a hard level
surface that does not have cracks or openings .
• Clear an area large enough to layout all components and hardware .
• When applicable, tighten all hardware connections by hand first . Once the step is
completed, go back and fully tighten all hardware .
• Follow all steps in order to properly assemble your product .
Step
Attach handle and air vent
1
A . Attach handle to lid using 2 sets of heat resistant washers (K), medium washers
(I), large lock washers (M), large wing nut (G) .
B . Attach air vent to lid using medium screw (B), small lock washer (L) and small
wing nut (F) .
Step
Attach handle and air damper
2
A . Attach handle to bottom bowl using 2 sets of heat resistant washers (K), medium
washers (I), large lock washers (M), large wing nuts (G) .
B . Attach 2 air dampers to bottom bowl using 4 sets of small screws (A) and small
wing nuts (F) .
Outdoor Charcoal Barbecue Grill Model No. NB2153D
Step
Attach legs and wheels
3
A . Attach front legs and wheel legs to bottom bowl using 4 sets of leg cups, large
washers (J), and large screws (C) .
Note: Do not tighten large screws (C) until bottom support grid is attached .
B . Attach bottom support grid to front legs using 2 sets of medium washers (I) and
large wing nuts (G) .
C . Attach wheels and bottom support grid to wheel legs using 2 large nuts (E) .
D . Tighten all 4 large screws (C) .
Step
Attach basket
4
Clip front basket to front legs .
Step
Attach side table
5
Attach side table to bottom bowl using 2 sets of small nuts (D), small lock washers
(L), small washers (H) and medium screws (B) .
Advertisement
