Table of Contents
Advertisement
Assembly Instructions
1
DO NOT RETURN TO PLACE OF PURCHASE.
Assembly Tips:
1 . Select an area where you will assemble this product . To
protect components, choose a smooth surface that's free of
cracks or openings .
2 . Spread out all parts .
3 . Tighten all hardware connections by hand first . Then, before
completing each step, go back and fully tighten all hardware .
Be careful not to over-tighten . That could damage surfaces or
strip threads .
4 . For best results, complete each step in the order presented .
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the
solution are included in the "Operating Instructions" section of
this manual) (not included) .
• (1) precision-filled gas cylinder between 11kg and 15kg . Your
barbecue will perform better if propane or LPG mixtures are
used . (not included) .
Typical assembly is approximately one hour .
3
Attach Caster
Note: Locking casters go in the back .
2
Attach left & Right cart frame
4
Attach Rear Cart Frame
1
2
5
Advertisement
Table of Contents
