Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Swisscom Powerline
- Page 1 Powerline Connection Kit setup Deutsch...
- Page 2 Connecting two Powerline adapters Plug the Powerline adapter directly into the wall power socket. Plug the first Powerline adapter to your DSL router using the provided Ethernet cable. « » and « » light up in green. (It is possible that the LEDs blink. This is not an error.) Plug the second Powerline adapter to your computer or your TV-Box.
- Page 3 . Out of service Reset Button With this button you can reset your Powerline adapter to its initial state. In order to do this, press the button for ca. two seconds and release. All LEDs light up briefly in orange.
- Page 4 Additional Powerline adapters You can connect additional Powerline adapters (optional). In order to do so, your existing Pow- erline adapters must be on . If one of them is in energy saving mode, unplug it and replug it again. Wait until the green light turns on.
- Page 5 Powerline adapter as this may damage the housing. Use only a slightly damp cloth. > In the event of damage, disconnect the Powerline Adapter from the mains and return the Powerline adapter to the following address: Swisscom (Switzerland) Ltd Materialrücknahme...
- Page 6 Swisscom (Schweiz) AG Contact Center CH-3050 Bern www.swisscom.ch DSL-Router/Routeur Powerline-Netzwerk über bestehendes Stromnetz Réseau Powerline par le réseau électrique existant Rete Powerline tramite la rete elettrica esistente Powerline network through existing electrical network...
Need help?
Do you have a question about the Powerline and is the answer not in the manual?
Questions and answers