Advertisement
and press D then G without releasing C.
Fat mode range (in all modes but unison)
When you are in all voice modes but unison, the fat knob will detune the
12 voices in 2 possible ways: by 1 semitone (set the fat/glide knob below
51%) or by 1 octave (set the fat/glide knob above 50%).
The LED display will indicated 1S (1 semi) or 1o (1 octave) as you adjust
the setting.
MultiChannel MPE mode
MEGAfm has a special multichannel mode that allows you to control it
with an MPE device with multichannel pitch bends, in this mode you can
continuously bend each voice within up to 4 octaves.
Press arp mode button to toggle this special mode on or off. When the
LED is on, MEGAfm is in normal single channel mode, when LED is off
MPE mode is active. When you choose MPE mode, the pitch bend range
is set to +/-48semi by default, you are free to change it before exiting
setup.
Exit setup
Press voice mode button again to exit setup.
Advertisement
