Advertisement
Saving a preset
You can save the current preset to any of the 100 slots, first press preset
up + preset down simultaneously to enter save mode.
The numeric display will flash the current slot number. This starts a 3
second countdown before automatically saving the preset at the same
slot.
But you can change the destination slot by pressing the preset up or
down buttons.
Each time you select a new slot the 3 second timer is reset.
Once you have selected the destination slot number you can either press
preset up+down again to confirm or wait a few seconds for the numeric
display to stop flashing.
Preset reset / panel update
Sometimes a fresh start is nice! Press reset at any time to replace the
current preset with preset 0. The numeric display will indicate "P0" for
preset zero.
Press reset a second time and MEGAfm will read all the faders and knobs
as they are set on the control panel. The numeric display will indicate
"PA" for panel.
Preset randomiser
Hold reset a couple seconds to completely randomise your preset,
anything could happen!
Advertisement
