Led Panel; Charging The Battery - Westfalia 17 61 15 Instruction Manual

LED Panel

There are five LED lights next to the switch, their functions are described
below. The 3 LED lights marked A are the battery indicators:
The red, green, and yellow lights turn on when the machine is put into
function.
All three lights on indicates that the battery is in good condition
The yellow and red lights indicate a low battery.
The red light alone indicates an empty battery. This means the battery has
run out and the machine will seize to operate shortly. This is to protect the
battery from deep discharge, which would shorten the life of the battery.
The 2 LED lights marked B in the drawing below are the charging
indicators. The green light indicates that the unit is connected to the power
mains, the red light turn on while the charge is in process. It turns off when
the charge is complete.
A

Charging the Battery

The power cable is under the small hinged cover (3) on the upper side of
the machine.
Connect the charging cable to a suitable wall socket. The red and green
LEDs in the area marked B light up.
When the charge is complete, the red LED turns off.
Before storing, give the battery a full charge. If the machine is stored for
extended amounts of time, the battery should be recharged from time to
time.
Operation
9
B