Royal Sovereign RBC-ES210-CA Owner's Manual page 8

PRODUCT OPERATION
•
Counterfeit Detection: UV and MG detection methods are automatically on
when the unit is powered up. To turn off any of these methods, press the "CF"
button until the indicator lights turn off.
4. Place bills into the hopper to begin counting.
Automatic and Manual Start Mode:
This unit is preset to automatically start counting bills once placed into the hopper. To
change to the manual start mode, press and hold the START button. The OFF LED light
will flash on the control panel. To return to automatic setting, press and hold the START
7
Button. The ON LED will flash on the control panel
• Press the "BATCH" button again to set the amount to 50.
• Press the "BATCH" button again to set the amount to 20.
• Press the "BATCH" button again to set the amount to 10.
• Press the "BATCH" button again to set the amount to 1.
• Press the "BATCH" button again to turn the batch mode off.
• Use the "+" and "-" buttons to increase and decrease the quantity by
1. Press "START" to set the batch mode setting.
o
UV Counterfeit Detection: Counterfeit bills often used white or
bleached paper, which will glow under ultraviolet light. When the UV
detector built into the unit finds a suspicious bill, the machine will stop
counting to allow removal and will display the error code on the
display. To resume counting, simply press "START".
o
MG Counterfeit Detection: If the magnetic detector does not find the
presence of magnetic ink that are standard in authentic bills, the
machine will stop counting to allow removal and will display the error
code on the display. To resume counting, simply press "START".
(CONTINUED)