Sharp Aquos R3 User Manual page 115

Resetting an access point
„
Reset the access point settings to the default state.
1
In the home screen, display "app list
[Settings]▶[Network & internet]▶[Mobile
network]
2
Select a nanoSIM Card
z If two nanoSIM Cards are inserted, touch the tab on the
screen top and select the nanoSIM Card you wish to set.
3
[Advanced]▶[Access Point Names]
4
[ ]▶[Reset to default]
If you fail to make automatic setting of an access point due to
z
signal status such as outside the service area, you are required
to set the access point again manually.
Data usage
You can check the data usage volume via mobile networks or
screen"▶
Wi-Fi networks. Also, you can set limit.
1
In the home screen, display "app list
[Settings]▶[Network & internet]▶[Data usage]
z The data communication volume via mobile networks is
displayed.
z When two nanoSIM Cards are inserted, the mobile network
settings are displayed for the respective nanoSIM Card.
2
Select an item
„ Data
data transmission in the background of some apps.
y For apps whose data communication is not restricted even
Mobile
„
mobile networks.
App data
„
networks on a diagram. Also, you can check apps having
used data communication.
113
Saver: Suppress the data usage volume by pausing
during Data Saver, you can set it from [Unrestricted data].
data: Set whether to use the data communication via
usage: Display the data usage volume via mobile
screen"▶
Handset Settings