Hardware Overview - Dell PowerConnect W-6000M3 Installation Manual

Hardware Overview

Figure 1
Ports
1000Base-X (SFP) Ports
Ports 0 through 9 on the W-6000M3 are 1000Base-X (SFP) ports for fiber or copper connectivity and are intended
for use with Dell approved SFPs.
NOTE: Dell tests and supports Dell optics within their controller systems. Third party optics are not tested or supported; therefore,
Dell does not guarantee proper functionality of third party optics. For further details regarding Dell approved SFPs, refer to the Dell
PowerConnect W-Series SFP Optical Modules Installation Guide.
2
W-6000M3 Controller Module
1000Base-X (SFP) Ports (Ports
0-9)
Dell PowerConnect W-6000M3 Controller Module | Installation Guide
Serial Console
Port
Gigabit Ethernet
Management Port
10GBase-X (XFP) Ports
(Ports 10 & 11)