Bissell POWERLIFTER 2389 Series User Manual page 9

Cleaning or Replacing the Filter
WARNING
Do not operate vacuum with damp or wet fi lters or without all fi lters in place.
1
Turn power OFF and remove the dirt
tank as directed in "Emptying the Dirt
Tank" section.
3
Tap firmly against the inside of a waste
container, removing any visible dirt.
NOTE: After heavy usage, you may clean the fi lter and fi lter cup by washing it
gently by hand in warm water and mild dish detergent. Rinse thoroughly and
make certain it is completely dry before replacing it.
2
Grasp filter tabs and lift up to remove
the washable filter cup from the dirt
tank. Grip the filter cup and turn
counterclockwise and lift down to
remove filter from filter cup.
4
Replace filter back into the filter cup
then turn clockwise to lock into place.
Attach filter cup back into the dirt
tank and attach to hand vacuum until
it snaps securely in place.
www.BISSELL.ca
9