SHAREBOT VIKING User Manual page 2

Warning
As with all professional products, Sharebot Viking, as well as its accessories
and materials must be handled carefully and professionally to ensure a
secure working environment and high durability of the device.
It should therefore be noted that any modification of the printer will void the
warranty. The same applies to any printer malfunction caused by improper
use.
Do not open the front door of the 3D printer while the machine is running.
Never look directly into the projected light and wear protective goggles
throughout the printing operation.
The material trays is spare part and is not covered by the warranty.
The lcd digital mask is spare part and is not covered by the warranty.
The projector LEDs have a set service life.
Regular maintenance will ensure consistent results over the entire period.
You can find further details on safe use of the printer on the technical data
sheet and the material producers manufacturer's guidelines.
The accessories kit contains cutters and/or other sharp tools. Handle these
with care.
Sharebot Viking is a 3d printer based on CE-certified digital mask technology:
- 2006/42/CE
- 2014/20/UE
- 2011/65/UE
Correct use is a prerequisite for achieving optimum results.
Technical features
Printing range
Accuracy XY
Accuracy Z
2K / UV projector
Wavelength
Printer dimensions 39x29x47 cm
Weight
Working
temperature
This data is subject to change for technical reasons.
192 x 120 x 200 mm
75 μm (+/- 25 μm)
50-100 μm, depending on the relevant material
parameter
2560 x 1600 pixel
405 nm (+/- 5nm)
Approx. 21,5 kg
18°- 25° C
SHAREBOT VIKING – User Manual