SHAREBOT VIKING User Manual page 12

Ensure that no resin is spilled out of the tray. Take special care to ensure that
no resin drips into the machine. If liquid resin does drip into the machine
disconnect the power cable and clean.
After filling the tray properly (Fig. 6), close the front door of the printer.
Start a printing operation
Is possible to start a printing job both from the lcd interface or the web
interface:
Web interface
– connect to the printer's web interface;
– select from the left menù "File manager";
– select "CWS FILES";
– press the "Print" button of the file that you want to build (if you want to
print the object from a USB stick select "USB");
– confirm the start of the printing process;
SHAREBOT VIKING – User Manual