Blind Monk Instruments Navigator Manual page 7

OSC
Line 1: selects the waveform for oscillator 1
Off
Saw
Double Saw - phase between the two saw waves can be modulated with the shape
control
Square/Pulse - can be modulated with the shape control
Square + Saw - both the square/pulse wave and sawtooth wave are mixed together
Saw
Double Saw
Square / Pulse
Square + Saw
Line 2: The shape parameter controls the shape of the double saw, square, and ring
modulation.
Line 3: turns the sub oscillator off and on and oscillator two off and on
The sub oscillator is a square wave based derived from oscillator 1
oscillator 2 is a square wave only
Line 4: adjusts the level of the ring modulator
7