Setting The Film Speed; Rewinding And Removing The Exposed Film - Leica R6 Instructions Manual

Setting the film speed
To set the hlm speed (ISO), press the
locking button @, at the same time turn the
setting ring @ until the required speed
appears in the window @. ttre display of
all ISO values is split, e. g. for ISO 100/21",
100 appears in the lower window and 21o in
the upper.
The setting range covers all values from ISO
I2/I2" to 3200/36" inclusive.
Rewinding and removing the exposed film
Exposure ofthe last frame blocks the action
of the quick-wind lever. Rewind the film
into its cartridge before removal from the
camera. Press the rewind button @ in the
camera's baseplate, hinge out the rewind
crank and turn it clockwise (direction of
arrow) until you feel a slight resistance as
the film is pulled out of the take-up spool.
Pull up the rewind crank and knob to open
the camera back, and remove the cartridge
with the exposed film.
(r t
,'$
,
t )
'
t '