Advertisement
XBKXSH140113.01
6、Part change
Disassembly of back cover
WARNING: Turn off the electrical power supply to the appliance prior to servicing it.
Failure to disconnect the power supply during service may result in an electrical shock
or fire hazard.
Step 1: Disassemble the control panel cover and control panel back cover .
Step 2: Use a screwdriver to disassemble the screws on back cover, and take the
back cover out from the clipping hole.
Step 3: Disconnect the wires from the turbo heating element. For the sake of
reassembly convenience, please mark the connection positions before moving the
wires. Remove the screws on the turbo heating element, and then take it out of from
clipping hole.
Step 4: Use a spanner or a nut-driver to rotate the nut on the convection motor
clockwise so that the nut be taking out, and then take the fan blade and washer out of
the convection motor.
BUILT-IN OVEN SALES SERVICE
第 9 页 共 12 页
Advertisement
