Advertisement
XBKXSH140113.01
Step 5: Disconnect the wires on the convection motor. For the sake of reassembly
convenience, please mark the connection positions before moving the wires. Remove
the screws fixed the convection motor.
Disassembly of top, bottom heating element
Step1: Remove the door from oven (please refer to Point 6-Step 1), and put it
horizontally on the table.
Step2: Disassemble the control panel cover and control panel back cover (please
refer to Point 6-Step 2).
Step 3: Disassemble the back cover (please refer to 6-Step 3).
Step 4: Disconnect the wires on the top heating element. For the sake of
reassembly convenience, please mark the connection positions before moving the
wires. Remove the screws on the top heating element inside the cavity, and then pull
it out of the cavity ribs.
Step 5: Disconnect the wires on the bottom heating element. For the sake of
reassembly convenience, please mark the connection positions before moving the
wires. Remove the screws from the bottom heater cover，and then pull the bottom
heater assembly out from the bottom.
BUILT-IN OVEN SALES SERVICE
第 10 页 共 12 页
Advertisement
