Subaru Ascent 2020 Quick Manual page 19

LIGHT CONTROLS
AUTO: If equipped, rotate the end of
1
the lever to automatically turn your
Subaru's lights on or off, depending
on the level of outside light.
Running Lights: Rotate the end of
2
the lever to turn on the instrument
panel lights, parking lights, side
marker lights, tail lights, and license
plate lights.
Headlights: Rotate the end of the lever to turn on the headlights, instrument panel
3
lights, parking lights, side marker lights, tail lights and license plate lights.
High Beams: Push the lever forward to change from low beam to high beam. If
4
equipped, this also activates the High Beam Assist (HBA) system. Pull the lever back
to center to return to low beam.
Fog Lights: If equipped, rotate the dial to turn on the fog lights.
5
Illumination Brightness
While the light switch is on, rotating the dial on the instrument panel
upward will make the illumination brighter. When the dial is fully rotated
upward (dots aligned), the instrument panel illumination stays at full
brightness. Rotating the dial downward dims the instrument panel
illumination.
Daytime Running Lights
The daytime running lights automatically turn on when the engine has started, the parking
brake is fully released, the light switch is in the off, "AUTO" (if equipped) or "
position, and the select lever is not in the "P" position. Always turn on the headlights when
it's dark outside by rotating the dial to the "
TURN SIGNALS
Push slightly up for right lane change or
fully up for right turn signal. Push slightly
down for left lane change or fully down
for left turn signal.
4
" or "AUTO" position.
3
2
1
5
"
17