Table of Contents
Advertisement
Safety Summary
(continued)
SPECIFIC
If you are upgrading an OIS12 system, you must back up your con-
CAUTIONS
figuration and data before you begin. If you have stored any other
files, you should also back them up. The OIS12 will only back up its
(continued)
own files. (p. A-12)
QNX must be installed on each computer on the network that has its
own hard disk. (p. A-12)
Ensure that the same time zone is used on all computers. (p. A-14)
You MUST choose to make every node a "Network Boot Server" in
order for the installation program to properly configure the network.
(p. A-15)
Do not press <Esc> unless you want to abort the installation. After
aborting, you will need to re-install QNX and OIS12 software so that
the software is correctly installed. (p. A-20)
Before installing or removing the security key, the computer MUST
be turned off and proper anti-static safety precautions must be fol-
lowed. (p. A-20)
Before connecting or disconnecting a printer to the security key, the
printer MUST be turned off. (p. A-20)
Never use the "vedit" editor to modify system files. Use of this editor
can result in system corruption. Instead use the "qed" editor. (p. D-2)
I-E96-107-2N
xi
Advertisement
Table of Contents
