Advertisement
CamControl2 Bundle
DIGIMIC
System start
System
start
System
System
start
start
Matrix- - - - Video
Matrix
Video- - - - Switcher
Switcher
Matrix
Matrix
Video
Video
Switcher
Switcher
Set the on/off switch of the video switch to "on" to turn on the unit. The front panel display will light. Now set
which input is to be switched to which output. First press the "IN" button of the video switch and then the
desired input (1-16). Now press the "OUT" button and select the output channel (1-16) by pressing the
corresponding button. The camera image can now be viewed on the connected screens. The display shows to
which output the respective input is connected.
Turn and press the control dial on the front of the video switch to set the basic settings of the unit. Press the
wheel to enter the main menu. Here you have the following options:
System Setting
Network Setting
Output Setting
Device Info
Exit
By turning the wheel you go to the corresponding menu point - by pressing you select it and change it.
Camera
Camera
Camera
Camera
The Brähler PTZ cameras are automatically switched on as soon as they are supplied with power. The camera
settings are made on the computer via the network. To do this, first go to the camera to be configured in your
browser (via the IP address of the camera). Log in to the manufacturer's menu (login data: admin/admin) and
give the camera a new IP address in the Configuration menu under Ethernet after your network.
Under menu item Preview you can set and save up to 255 different camera positions for each camera.
Use the arrow buttons on the right side of the screen to pan the camera. Use the ... and ... keys to zoom in or
out of the camera. Set the camera to automatic, the focus is adjusted automatically. To adjust the focus
manually, set the system to Manual. To save the settings, press the Preset / Set button.
The camera can also be reset during operation using an external camera controller. This becomes
necessary, for example, when different speakers speak on the podium.
BRÄHLER Systems GmbH
Auf der Alten Burg 6
53639 Königswinter
Germany
S4.1371 GQ 200113 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice
Quick Guide
Quick Guide
Quick Guide
Quick Guide
In this example, the distribution is as follows:
Input 1 goes to output 1
Input 2 goes to output 2
Input 3 goes to output 3
Input 4 goes to output 4
Input 5 goes to output 5
Input 6 goes to output 3
Input 7 goes to output 7
Output 8 is defined as the main output. (In this example, input
image 1 is output via output 8.)
The other inputs and outputs are not assigned.
T +49 (0)2244 930-0
F +49 (0)2244 930-450
sales@braehler-systems.com
www.braehler-systems.com
4
Advertisement
