Advertisement
CamControl2 Bundle
DIGIMIC
The camera can be rotated, panned and zoomed. With a combination of several cameras, almost any angle of a
conference room can be optimally staged.
RS232 IN and OUT
RS485
C C C C onstruction
onstruction
onstruction
onstruction
Connect the video switcher and the cameras to a power source. Use only suitable cables and connectors.
Connect the cameras to the video switcher (IN) using the SDI cable - camera 1 to input 1, camera 2 to input 2,
and so on. Also connect the cameras to your computer using network cables. Position the cameras at their
destination. If desired, connect (preview) screens to the video switcher (OUT).
Output 16 is defined as the program output by default in the system - this outputs the current camera image to
a main screen. Connect output 16 to your output device (e.g. beamer) accordingly. The image selection is
controlled via CamControl2 software - therefore connect the video switcher to a computer with CamControl2
using a network cable.
Connection preview screens
If required, the cameras can be adjusted via an external controller. This is useful, for example, if cameras are to
be set during a conference, for example to adapt to speakers. If necessary, connect the external control to your
computer via a network cable. (For operation of the camera control, please refer to the operating instructions of
the corresponding device.)
The camera system is now ready for use.
BRÄHLER Systems GmbH
Auf der Alten Burg 6
53639 Königswinter
Germany
S4.1371 GQ 200113 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice
Quick Guide
Quick Guide
Quick Guide
Quick Guide
Network
connection (RJ45)
HDMI
3G-SDI
A-IN
Connection main screen
T +49 (0)2244 930-0
F +49 (0)2244 930-450
Power supply DC 12V
Network cable
Power suply
sales@braehler-systems.com
www.braehler-systems.com
3
Advertisement
