Page 2
CamControl2 Bundle DIGIMIC Quick Guide Quick Guide Quick Guide Quick Guide Introduction and Connection Introduction and Connection Introduction and Connection Introduction and Connection With the DIGIMIC camera system CamControl2 bundle you have always set the stage for your conference. In addition to controllable cameras and brählerOS CamControl2 software, a video matrix switch ensures the best possible images.
Page 3
CamControl2 Bundle DIGIMIC Quick Guide Quick Guide Quick Guide Quick Guide The camera can be rotated, panned and zoomed. With a combination of several cameras, almost any angle of a conference room can be optimally staged. Network connection (RJ45) RS232 IN and OUT Power supply DC 12V HDMI RS485...
CamControl2 Bundle DIGIMIC Quick Guide Quick Guide Quick Guide Quick Guide System start System start System System start start Matrix- - - - Video Matrix Video- - - - Switcher Switcher Matrix Matrix Video Video Switcher Switcher Set the on/off switch of the video switch to "on" to turn on the unit. The front panel display will light. Now set which input is to be switched to which output.
Page 5
CamControl2 Bundle DIGIMIC Quick Guide Quick Guide Quick Guide Quick Guide CamControl2 CamControl2 CamControl2 CamControl2 Open the software program on your computer via the CamControl2 button. The first time you open it, you have to enter your license file (a corresponding window will open on your screen). Each license file is issued to the serial number of DIGIMIC central units.