Labgear LDU608G Quick Start Manual page 2

IR Control
In your remote rooms you can control your
centrally located equipment over the coaxial
cable using the Global tvLINK (Sky only) or
the Labgear HandyLink (all conventional IR
devices).
The HandyLink box goes at your main
location and is the last item before you
connect back to the Up-Link (as Page 1). If you are using tvLINK your Skybox RF2 Out
connects directly to the Up-Link.
Both tvLINK and HandyLink IR Sensor are connected directly to the TV wall outlet before
any other equipment (shown above with Diplex and standard TV outlets).
You must use non-isolated outlets.
Use without Sky
You can distribute Cable TV in the same way as Sky except that it is recommended that
you run your cable feed directly to the decoder For IR control use HandyLink IR.
If there is no equipment at the main location you must ensure that the switch on the front
of the unit is set to UHF & CCTV or you will not receive any TV pictures to the remote
locations.
tvLink
Receiver
HandyLink
Receiver

RF Out RF Out IR Out IR Out Plasma / LCD / TV
HandyLink Kit
MRX120
RF in
1 2
Component SCART SCART HDMI
RF Out
Sky Plus / HD
RF in LNB LNB
Component SCART SCART HDMI
DVD Player
RF Out
Modulator
RF in SCART