Download Print this page
Labgear LMA125VK Quick Start Manual

Labgear LMA125VK Quick Start Manual

Low noise masthead amplifiers

Advertisement

Quick Links

LMA125VK 12-25dB Variable Gain UHF Amp
KIT125VK
LMA125VK + PSUFC Power Supply
LMA415K
2-in, 4-out 15dB VHF/UHF Amp
KIT415K
LMA415K + PSUFC Power Supply
Introduction
The name Labgear has been associated
with quality signal distribution since 1932
and the current range of amplifiers
continues to uphold that tradition.
All LMA masthead amps can carry
analogue and digital TV, Freeview, DVB-T
and DVB-T2 HD TV signals and have:
• Improved gain flatness delivering a
better balance across the
performance range
• Lower noise figure for optimised
signal quality
• Greater signal handling capacity to
cope with more channels
• Better impedance matching and
therefore improved signal transfer
from amp to cable
and now
• Class 1 filtering to provide a typical 40dB protection from
interference from 4G and 5G mobile phone signal transmissions
All LMA amplifiers are compliant with the Radio Equipment Directive 2014/53/EU and meet
harmonised standard EN 303 354 for product Type D, Class 1.
Labgear masthead amps are packed with features to make installation easier,
simplify fault diagnosis and deliver a durable, quality solution, including:
• A sturdy metal mast clamp instead of a plastic cable tie
• LED power indication which assists fault diagnosis
• Tilt-out module for easier cable connection
• F-type connectors for better matching and security
• Solid housing with weatherproof seal
• Every masthead is supplied with a FREE metal f-type spanner
Power On LED
Tilt
Low Noise Masthead Amplifiers
Weatherproof
Seal
Locking
Catch
COMPLIANT
PSUFC supplied
with KIT125VK
& KIT415K
Mast Clamp
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the LMA125VK and is the answer not in the manual?

Questions and answers

Summary of Contents for Labgear LMA125VK

  • Page 1 All LMA amplifiers are compliant with the Radio Equipment Directive 2014/53/EU and meet harmonised standard EN 303 354 for product Type D, Class 1. Labgear masthead amps are packed with features to make installation easier, simplify fault diagnosis and deliver a durable, quality solution, including: •...
  • Page 2 Typical Installation and Specifications COMPLIANT General Safety Precautions • To avoid risk of electric shock during installation we recommend that the power unit and all associated TV receivers, etc. are isolated from the mains until the installation is complete. • Fixed wiring for electrical supply to these products should be carried out in accordance with BS7671 •...
  • Page 3 LMA amps are fitted with a Class 1 4G and 5G filter however if you wish to receive TV on Channel 60 you should use a Labgear LM125V unfiltered masthead amplifier or an LDL DigiLink Class 0 indoor amplifier, you may also need a Channel 60 4G/5G filter.
  • Page 4 This does not affect your statutory rights. Labgear Reserve the right to modify their designs or specifications, In the light of future developments, without prior notice. Performance figures quoted are typical and subject to normal manufacturing and service tolerances.

This manual is also suitable for:

Kit125vkLma415kKit415k