Toro 121-7530 Installation Instructions page 2

2
Installing the Cup Holder
Parts needed for this procedure:
1 Cup holder
2 Screw, #10 x 5/8 inch
2 Flat washer
2 Lock nut, #10
Procedure
Install the cup holder to the bag bracket with 2 (#10
x 5/8 inch) screws, 2 washers and 2 lock nuts (#10)
(Figure 2). Position the washers between the bracket
and the lock nuts.
2
1
1. Cup holder
2. Bag bracket
3. Lock nut (#10)
3
4
5
Figure 2
4. Washer
5. Screw (#10 x 5/8 inch)
3
Installing the Trash Bag
Parts needed for this procedure:
1 Trash bag
Procedure
Install the trash bag into the slots in the bag bracket
(Figure 3).
g020054
1. Trash bag
2
2
Figure 3
2. Bag bracket
1
g020055