Connecting The Speakers - MadBoy F-LOUD 370 Owner's Manual

Connecting the Speakers

Connecting the speaker with speaker wire
1
Strip 10mm from
the end of the cable
Twist the stripped wire
Connecting the speaker with a banana plug
1
Tighten the terminal by
turning it clockwise
Connecting the speaker with the Speakon cable
CHANNEL B
CLOSE
OPEN
Notice! Speakon and binding post connectors are connected in parallel. Minimum speaker
impedance is 8 Ω if both Speakons and binding posts are used same time.
2
Loose the terminal
by turning it
counterclockwise
2
Insert the plug tightly into the
terminal
CHANNEL A
WWW.MADBOY-AUDIO.COM
3
Insert the stripped end of the
speaker cable into the
terminal
How to connect the Speakon cable:
Push the speakon cable into the speakon
connector and close it by turning clockwise.
How to remove the Speakon cable:
Open the speakon connector by pulling
release lever backwards and turning it
counterclockwise.
9
4
Tighten the speaker
terminal by turning it
clockwise
3
Profile