Victaulic 726 Vic-Ball Series Installation Instructions

• Read and understand all instructions before attempt-
ing to install, remove, or adjust any Victaulic piping
products.
• Wear hardhat, safety glasses, and foot protection.
Failure to follow these instructions could result in
serious personal injury and/or property damage.
REQUIRED PARTS
The following parts are required for installing a gear operator onto a Series 726 Vic-Ball Valve.
Qty. Description
1 Gear Operator
1 Drive Hub
1 Stem Adapter
1 Bracket
Qty. Description
1 Flat Washer
3 Lock Washer‡
4 Lock Washer§
Hex-Head Screw (for mounting
4
bracket to valve)
Hex-Head Screw (for mounting gear
4
operator to bracket)
‡ Lock washers required for installing the bracket to the mounting plate of the valve.
§ Lock washers required for installing the gear operator to the bracket.
Victaulic Company of America
Phone: 1-800-PICK-VIC (1-800-742-5842)
Fax: 610-250-8817
e-mail:pickvic@victaulic.com
I-726.GO
3570 Rev.A
R
• Instructions for Lever Handle to Gear Operator Conversions
1 ¹⁄₂
(40)
M6
M6
M8
M6 1.0
(16 mm Long)
M8 1.25
(16 mm Long)
®
VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY
Victaulic Company of Canada
Phone: 416-675-5575
Fax: 416-675-5565
e-mail: viccanada@victaulic.com
9/02 © Copyright 2002, Victaulic
Installation Instructions
Series 726 Vic-Ball
• Instructions for Adjusting Closed and Open
Travel Limit Stops on Gear Operators
• Disable the system's pump before performing any operator conversions.
• There must be ZERO differential pressure between the valve and the inlet and outlet.
Failure to follow these instructions could result in serious personal injury and/or
property damage.
Valve Size – inches/
2 ¹⁄₂
2
(50) (65)
Size of Hardware (Metric)
M6 M8
M6 M8
M8 M8
M6 1.0 M8 1.25
(16 mm Long) (16 mm Long)
M8 1.25 M8 1.25
(16 mm Long) (16 mm Long)
Victaulic America Latina
Victaulic Europe
Phone: 610-559-3300
Phone: 32-9-381-1500
Fax: 610-559-3608
Fax: 32-9-380-4438
e-mail: vical@victaulic.com
e-mail: viceuro@victaulic.be
® Registered Trademark of Victaulic
®
Valve
millimeters
3 4
(80) (100)
M8 M10
M8 M10
M8 M8
M8 1.25 M10 1.5
(16 mm Long) (16 mm Long)
M8 1.25 M8 1.25
(16 mm Long) (16 mm Long)
Victaulic Asia Pacific
Phone: 65-6235-3035
Fax: 65-6235-0535
e-mail: vicap@victaulic.com
Printed in U.S.A.
6
(150)
M10
M10
M8
M10 1.5
(16 mm Long)
M8 1.25
(16 mm Long)
Z000726000