Related Manuals for WaterCop SmartConnect
Summary of Contents for WaterCop SmartConnect
- Page 1 The smart way to get remote mobile control and access to your WaterCop automatic shut-off system. REMOTE WATER MOBILE WIFI NOTIFICATION DIRECT CONTROL APPS COMPATIBLE ALERTS ETHERNET...
- Page 2 SmartConnect App on your smartphone or tablet. If a leak is detected, the SmartConnect App notifies you of the potential issue. You can also open and close your WaterCop valve through the app for complete control of your water supply.
- Page 3 2. Mount WaterCop SmartConnect with the supplied wall anchors or other methods to suit the location. 3. Once mounted, run a CAT5 or CAT6 cable from the WaterCop to the WaterCop SmartConnect port marked “CONNECT TO VALVE ACTUATOR”. Power is supplied through the CAT5 or CAT6 cable.
- Page 4 8. On the My WaterCop Devices screen, click the blue “Add” button in the top right corner while physically near the WaterCop SmartConnect. After the default name “WaterCop GW” pops up, verify the MAC address matches with the label on the WaterCop SmartConnect and carton, click the box to select it.
- Page 5 WaterCop system, check system to verify Wi-Fi connection and power to the WaterCop SmartConnect. If you are unable to resolve any of the troubles noted above or experiencing other issues, please contact your Installer directly or WaterCop Customer Service for assistance at 800-545-3636.
- Page 6 Limited Warranty DynaQuip® Controls Corporation warrants the electrical components of the WaterCop® SmartConnect to be free from defects in material and workmanship under normal use and if properly installed for a period of three years from the date of purchase. If found to be defective as mentioned above, it will be replaced or repaired if returned prepaid along with proof of date of purchase.
Need help?
Do you have a question about the SmartConnect and is the answer not in the manual?
Questions and answers