Advertisement
Troubleshooting
The appliance is making
lots of noise?
Liquid flowing sound
inside the cabinet?
The appliance is not
starting?
The compressor is
running continuously?
The door does not seal
tightly?
The appliance does not
cool sufficiently?
There is an unpleasant
smell inside the
cabinet?
Condensation on the
glass door?
The light is not working? •
•
Please adjust the front feet to make the appliance
level.
•
Please ensure that a 5mm space on either side of the
appliance has been allowed for during installation.
•
This is normal because of the refrigerant working
inside the appliance.
•
Make sure that the appliance is connected to the
power supply properly.
•
Make sure to switch on the power.
•
The compressor will re-start 5 minutes after a power
cut.
•
If no cold is being produced please call the
NordMende Service Department.
•
After prolonged use, the door seal might get stiff and
distorted partially.
1. Heat the door seal with hair dryer or a hot towel.
2. This should make the door seal soften and allow it
to close more easily.
•
Please adjust temperature setting.
•
Keep the appliance away from sunlight or heat.
•
Please do not open the door frequently.
•
It is common for there to be a slight plastic smell for
brand new appliances, it will disappear after a short
time.
•
Clean the compartment and ventilate it for a few hours.
•
Please do not open the door frequently or for long
periods of time.
•
Please do not set the temperature too low.
•
High ambient temperatures and humidity can cause
condensation.
Check the power supply first.
•
Call the NordMende Service Department if the light is
broken.
13
Advertisement
