Advertisement
• Open the door to 90° and keep it steady.
• Unscrew the two screws ① from the right lower hinge ② [Figure 1].
• Pull the door ⑤ outwards slowly [follow the arrow direction in Figure 2] to remove it
off the lower hinge ② and continue to pull the door ⑤ downwards slowly until it is
also removed from the top right hinge ④, take off the lower hinge plate ③ from the
door axis hole [Figure 2].
• Unscrew the top right hand hinge ④ and the right lower hinge ② from the cabinet
⑥. Keep them in a polybag for safe keeping, so that you have them in the future if
you ever want to change back to a left hand opening door [Figure 3].
• Install the top left hand hinge ⑦ and left lower hinge ⑧ to the left hand side of the
cabinet. (⑦ & ⑧ delivered in a separated polybag inside the packaging) [Figure 4].
• Turn the door ⑤ 180° upside down and fit the lower hinge plate ③ to the bottom
door axis holes. Fit the top door axis hole to the top left hand hinge ⑦ and put the
lower hinge plate ③ slowly on the left hand lower hinge ⑧ while keeping the door
steady. Screw in the left lower hinge with the plate and the door reversal is
complete!
9
Advertisement
