Advertisement
Release date: 20.02.19 rev 1.0 19 SW25
AUTHOR: PASER
uDAB
UPDATE
UDAB update is elementary. No special soDware is required.
It is sufficient to download the update file, then transfer it to a USB s ck.
Now with UDAB powered (red or green LED) insert the USB s ck on the USB port of the module.
LED will start to flash orange for a few seconds, once the upgrade finished LED switch ON Green, UDAB
will be in opera ng state. Remove the USB s ck.
uDAB
RESET
To perform a total reset of the module with consequent reset of the channel lists and seEngs, with the
LED of the module on, simply press the bu<on on uDAB and wait for the LED goes off, releasing the
bu<on on the module the KIT will restart.
7
Advertisement
