Advertisement
Release date: 20.02.19 rev 1.0 19 SW25
uDAB
1. Connect the power/speakers T harness of the KIT in series to the radio one.
2. Connect the USBCOM and USBREC to the plugs on UDAB module.
3. Connect the SMB plug of the DAB antenna to the related plug on the module.
4. Install the bu<on in a convenient loca on as example near the original USB of the vehicle. Connect
the PLUG of the bu<on to corresponding connector of the T harness. No hole is required as the
bu<on is provided with adhesive for fixing.
5. Ensure the module box with the screws included.
2
3
1
4
2
INSTALLATION STEPS
5
AUTHOR: PASER
Advertisement
