Download Print this page

Specifications - Tripp Lite SmartPro SMART2200CRMXL Specifications

2.2kva line interactive sine wave ups, 1900w, extended-run
Hide thumbs Also See for SmartPro SMART2200CRMXL:

Advertisement

Includes NEMA 5-20P input plug, NEMA 5-15R and 5-15/20R output receptacles
Network management interfaces support simultaneous communications via USB port, DB9 serial port and optional SNMP/Web
management accessory card slot
Optional SNMPWEBCARD offers remote management and control of the UPS via direct network connection
Additional ENVIROSENSE accessory, when used in conjunction with SNMPWEBCARD reports temperature, humidity and status of up to
two directly connected contact closure sensors
HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS
X
97% efficiency in line power mode offers substantially lower operating costs than lower efficiency UPS types
Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once
Includes PowerAlert monitoring software with USB and serial cables
Emergency Power Off (EPO) interface
Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices
3-stage metered current monitoring and battery charge status LEDs; Utility power and voltage regulation LEDs; Audible alarm; Self-test
2-post rackmount accessories included; 2-9USTAND tower stands and UPSRMRII 4 post rackmount kit available
Field-replaceable, hot-swappable internal batteries and external battery packs
Attractive all-black color scheme

Specifications

OUTPUT
Output Volt Amp Capacity
(VA)
Output kVA capacity (kVA)
Output Watt Capacity
(watts)
Output kW capacity
Output power factor
Nominal Output Voltage(s)
Supported
Frequency compatibility
Output voltage regulation
(line mode)
Output voltage regulation
(Battery mode)
Built-in UPS output
receptacles
Built-in controllable
switched load banks
Output AC waveform (AC
mode)
Output AC waveform
(battery mode)
INPUT
Rated input current (at
maximum load)
Nominal Input Voltage(s)
Supported
UPS input connection type
2200
2.2
1900
1.9
0.9
120V
60 Hz
-18%, +8%
+/- 5%
4 5-15R outlet(s); 4 5-15/20R outlet(s)
Three switchable single-outlet 5-15R load banks
Sine wave
Pure Sine wave
16A
120V AC
5-20P

Advertisement

loading