Inalto IWCD46.1 User Manual page 5

46 bottle dual zone
Hide thumbs Also See for IWCD46.1:
Table of Contents

Advertisement

PAGE 5
24
It is recommended that you remove all the internal and external
packaging and clean the interior of the appliance prior to first use. We
recommend you wipe all parts with warm water then rise and dry.
Place all parts back into the appliance after cleaning.
Cleaning and user maintenance shall not be made by children
without supervision.
Opening the door for long periods of time can cause a significant increase
in the temperature in the compartments of the appliance.
- Only store wine in sealed containers.
- Do not overload the cabinet.
- Only open the door when necessary.
- This is a self-defrosting appliance. The compressor will not run during
the twenty minutes defrost cycle.
- Do not pull the shelves beyond the anti-stop position when fully loaded.
- This appliance is intended to be used exclusively for the storage of wine.
- In the event of a power failure leave the door closed as much as possible
to maintain the internal working temperature. Should the power failure
continue for a prolonged period you should take steps to protect the
contents of the wine cooler against a rise in temperature. The wine
cooler will remember the selected temperature setting and revert to
these setting once the power is restored.
4
INALTO.HOUSE
Defrosting
The wine cooler is d
During defrost, the
Door alarm
The wine cooler is e
or press any key on
Controls
It is recommended
ambient temperatu
example, placing yo
operation temperat
1
2
Upper zo
To switch the pow
Press and hold th
Press and hold th
To change the tem
Continue to pres
The preset tempe
To change the te
button at the sam
The display show
Optimal temperatu
Whilst wine is be
As a guide for red
To use the internal
Press the light bu
To turn the light O
door controls fun
To turn the light f
control function
To lock the whole
Press power butt
Press power butt
Tips, please see the

Advertisement

Table of Contents
loading

Table of Contents