Table of Contents
Advertisement
Troubleshooting
PROBLEM
THE DOORS DO NOT
CLOSE PROPERLY
UNUSUAL NOISES
THE COOLER DOOR
WILL NOT OPEN
THE COMPRESSOR
RUNS CONSTANTLY
THE EXTERNAL
FRIDGE SURFACE
IS WARM
SMELLS/ODOURS
12
USER MANUAL
SOLUTION
-Ensure there are no obstructions preventing
door closure.
-Check the door compartments and shelves
are correctly in place.
-Check the door seal is not warped or torn.
-Check the appliance is level.
-Check that the appliance is on a flat, level surface
and is stable.
-Check the spacing's around the appliance and
ensure it is not touching other items.
-Bubbling and gurgling sound:
This noise is emitted as the coolant fluid flow through
the pipes within the system. This is normal.
-Contraction and expansion of the inside walls may
cause popping and cracking noises.
-If the door has just been opened, leave it for a few
minutes to allow the air pressure to equalise
before trying again.
-The temperature is set too cold: select a lower
(warmer) setting.
-The door is open, or something is obstructing proper
door closure.
-The room temperature is hotter than usual.
-The exterior walls can be warmer than room
temperature. This is normal while the compressor
works to transfer heat from inside the bottle cabinet.
-Check all the drinks that are in the cooler are in date
and correctly packaged. Please remove anything
that may be spoiled and repack if necessary.
-Check for spillages throughout the cooler. Spillages
may cause odours if left unwashed. Wash accordingly
to the manufacturers advise.
PAGE 12
Advertisement
Table of Contents
