Page 1
Glider X1 Enterprise Touch Computer Bitatek Co. Ltd. has been acquired by iMotion Group in 2019. Ownership of all products and trademarks of Bitatek Co. Ltd. shall be assumed by iMotion Inc. and its subsidiaries unless otherwise specified. Version 2...
SIM Card/SD card Installation ............13 3.3.5. Charging the battery ............... 14 3.3.6. Switch the power ON or OFF ............15 3.3.7. Transfer file between Glider X1 and Computer ......17 Chapter 4. Installation & Operation ................. 19 4.1. Barcode ....................... 19 4.1.1.
Page 3
Regulatory ....................44 5.2. Battery Notes ....................44 5.3. Storage and safety notice ................45 5.4. Product Operation and Storage Notice ............45 5.5. Adapter Notes ..................... 45 5.6. Support Barcode information ..............46 Glider X1 Enterprise Touch Computer User’s Guide...
Chapter 2. About this manual Thank you for purchasing Bitatek Glider X1 Enterprise Touch Computer. This manual explains how to install, operate and maintain our product. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, such as photocopying, recording, or information storage and retrieval systems, without permission in writing received from BitaTek.
Fast roaming under 100ms Enterprise security Europe: Wireless WAN (Option) FDD LTE: B1/B3/B5/B7/B8/B20 TDD LTE: B38/B40/B41 WCDMA: B1/B5/B8 GSM: 900/1800 Japan (by request) FDD LTE: B1/B3/B8/B18/B19/B26/B41 WCDMA: B1/B6/B19 North America-V FDD LTE: B4/B13 Glider X1 Enterprise Touch Computer User’s Guide...
Page 7
Side Key : Scan key left and right., volume key up and down, power key and function key. Dimension and Dimensions: 158 X 77 X 16.9 mm (Estimation) Weight Weight: 250g (Estimation) Glider X1 Enterprise Touch Computer User’s Guide...
Front view Front Camera Logo LED Back key Home Key Menu key Scan Button Speaker Site view Ear Phone Connector Scan Button Function Button Power Button Scan Button Volume Up Volume Down USB Connector Glider X1 Enterprise Touch Computer User’s Guide...
1. Remove the hand strap from the hand strap hook, then to lose the hand strap from the bottom cover. 2. Push the battery cover switch to “open”, and remove Battery Cover from the device bottom cover. Glider X1 Enterprise Touch Computer User’s Guide...
Page 12
3. Insert the battery pack, and restore Battery Cover 4. Push the battery cover switch to “close” Glider X1 Enterprise Touch Computer User’s Guide...
2. Insert the SD card to the left slot(please see picture 1) 3. Insert the SIM card to the right slot(please see picture 1) 4. Restore the battery pack and battery cover 5. Push the battery cover switch to “close” Glider X1 Enterprise Touch Computer User’s Guide...
3.3.5. Charging the battery Before turning on and starting Glider X1, it is recommended that you fully charge the battery first. If the battery has been discharged for several days, you may need to charge for several minutes before powering it on.
Switch Power On Press the POWER button until Glider X1 screen start. When you turn on Glider X1 for the first time, you can put the app on the desktop, then press OK button. When you turn on Glider X1 for the first time, you can put the app on the...
Page 16
Set the Ringtone & notifications item of volumes Setting to Vibrator. The System will shut down and all data will be kept. Set the Ringtone & notifications item of volumes Setting to Sound ON. Glider X1 Enterprise Touch Computer User’s Guide...
You can transfer your file from or to your computer. The OS of host side please use Windows 7 or beyound. Connect Glider X1 to your computer. Your computer will recognize it is USB charging. Then slide from top, the system will show as the picture below, then you can select File transfers.
Page 18
You may need download the Google sync device manager software into your computer. You can set it up to automatically get music, photos, and videos files of Glider X1 to your computer. Please disable check box of “USB debugging” on the “Developer options”...
Select “Symbology Settings” item that you can change the detail setting of all symbologies. Every parameter of each symbology is different. For detail of symbologies supported, please refer to 6.6 Barcode support information. Glider X1 Enterprise Touch Computer User’s Guide...
Page 20
Select “Formatting” item that you can set up prefix /suffix. You can enable/disable code ID, or set up separator character of data format when you scan a barcode. Glider X1 Enterprise Touch Computer User’s Guide...
Page 21
Select “Scanner Settings” that you can set up of Scanner engine behavior. Select “Good Read” item that you can enable / disable vibrator and other settings about Good read behavior. Glider X1 Enterprise Touch Computer User’s Guide...
Scan demo app. Press Trigger button or Scan Key and aim to a barcode, it will display the content of barcode after decode complete. Press Back Button to quite this App. Glider X1 Enterprise Touch Computer User’s Guide...
Tap connect. You'll see the Wi-Fi icon in the status bar when connected. Tap and hold a Wi-Fi network that you already connected, then you can select Forget network to disconnect or select modify network to reenter the network key or password. Glider X1 Enterprise Touch Computer User’s Guide...
If the wireless network that you want is not listed, tap + to manually add When enabled, the Wi-Fi icon is displayed on the status bar. If you insert 3G SIM card into Glider X1, the icon is displayed on the status bar.
Android settings. When you enable Airplane (Flight) mode, all wireless radios on Glider X1 are turned off, including the call function, data services, Bluetooth, and Wi-Fi. When you disable Airplane mode, the call function is turned back on and the previous state of Bluetooth and Wi-Fi is restored.
Android Beam option, make sure it is also turned on. 2. Make sure that the NFC area (shaded part) of Glider X1 and the other phone's NFC area are close to one another. Experiment by slightly moving the phones until a connection is made.
(such as contact information), additional instructions on how to save the item will appear on the receiving device. 4.2.5. Set Fey Glider as a portable hotspot Share your data connection with other devices by turning Glider X1 into a Wi-Fi hotspot. Please tap to go to Setting of Android 1.
Setting of Android 1. Open the Settings app 2. Under Wireless & Networks, tap More. 3. Tap Bluetooth tethering check box Connect Glider X1 to your computer using Bluetooth. 4.3. Backup & Reset Please tap to go to Setting of Android, You can reset to factory default when you select Factory data reset item, it will erase all include enterprise folder.
Page 29
< Factory Data Reset > < Network Setting Reset > You can reset to factory default when you select Network Setting reset item, it will erase all RF data. Glider X1 Enterprise Touch Computer User’s Guide...
Smart dial searches and calls a stored/synced contact or a number from your call history. You'll see the missed call icon in the status bar when you miss a phone come in. Glider X1 Enterprise Touch Computer User’s Guide...
4.5. People The People app lists all contacts you've stored on Glider X1 and from online accounts you're logged in to. Use the People app to easily manage communications with people that matter to you. Please tap to start People App Please tap to Add new People.
Message App Please tap to Add new Message, then input the phone number of the people that you want send to. And write the content of message. And press to start send. Glider X1 Enterprise Touch Computer User’s Guide...
Page 33
Press Button and select Settings item to enable message setting. Glider X1 Enterprise Touch Computer User’s Guide...
4.7. Email The Mail app is where you read, send, and organize email messages from one or more email accounts that you’ve set up on Glider X1. Before use Email, you must set the mail account first. Please make sure the WiFi is Ok, when you set the mail account.
4.8. Camera Please tap to start Camera App, press to take a picture. Video Camer Camera Settings Press to do advance setting. Glider X1 Enterprise Touch Computer User’s Guide...
Page 36
Press to do mode setting Press to do effects setting Press , it is change the camera on the front or back. Press , it is disable or enable HDR setting. Glider X1 Enterprise Touch Computer User’s Guide...
Page 37
Video Settings Press to do advance setting. Glider X1 Enterprise Touch Computer User’s Guide...
Use the Calendar app to view your events, meetings, and appointments. If you've signed into your online Google mail accounts, related events will also appear in Calendar. Please tap , and then choose a calendar view display mode. Glider X1 Enterprise Touch Computer User’s Guide...
The Calculator App have two panels. You can press Menu Button or slid screen to right /left to change panel between Basic and advance panel. Basic Panel as follow Press and slide to left to Advance Panel Glider X1 Enterprise Touch Computer User’s Guide...
4.11. File Manager Please tap to start File Manager App. You can open /copy/ move/delete file or folder. Press the fold name than you can do another actions. Glider X1 Enterprise Touch Computer User’s Guide...
4.12. Widgets/APPS You can press some Widget tools and add the widget tools to the home Screen or other application screen. Glider X1 Enterprise Touch Computer User’s Guide...
2. If a battery performance decreases more than 20%, the battery is at the end of its life cycle. Stop use and ensure the battery is disposed of properly. Glider X1 Enterprise Touch Computer User’s Guide...
2. Please remove the power adapter when the battery is fully recharged. 3. The bundled power adapter that comes with your Bitatek product is not meant to be used outdoors. An adapter exposed to water or rain, or a very humid environment can cause damage to both the adapter and the product.
Interleaved 2 of 5 MicroQR Discrete 2 of 5 Codabar Matrix 2 of 5 GS1 DataBar US Postnet US Planet UK Postal Japan Postal Australian Postal Netherlands KIX Code USPS 4CB/One Code/Intelligent Mail Glider X1 Enterprise Touch Computer User’s Guide...
Need help?
Do you have a question about the Glider X1 and is the answer not in the manual?
Questions and answers