AHA Smart Pass FPS-1000R User Manual page 32

How to assemble the main unit and the table stand
Table stand
1
The table stand has a cover, non-slip foots (Foot x 3ea),
and screws (M3 x 3ea) on the bottom surface.
2 Disassemble the table stand
Separate the foots and screws from the bottom of
the table stand to dissemble the cover and table
stand.
3 The main unit and stand assembly
Put the cables in the hole of the stand and
insert the main unit into the hold of the stand
and fix the
Cable connection
4
Connect the LAN and DC Jack
of the stand to the main unit
and close the stand cover and
fix the cover with the screws
and the stand foots.
Pull USB and other terminals
out of the center hole of
FH M3*6 SCREW x 3
ST AND FOOT x 3
32