AHA Smart Pass FPS-1000R User Manual page 8

(2) Inspection setting
This is a detailed setting menu related to face recognition and body temperature
measurement.
No. Name
Body temperature
1
test
Temperature
2
compensation
3 Scene selection
4 Alarm threshold
Body temperature
5
alarm
Temperature
6
display
7 Fan
8 Mask detection
9 Stranger mode
10 Stranger record
Turns the body temperature test function on or off.
It is used to calibrate the temperature when measured different
from the actual body temperature by the external temperature.
In case of manual setting, detailed input field appears. Input
value is between 0 ~ 1 ℃.
Setting whether the device is installed indoors or
outdoors.
If the measured body temperature is higher than the entered
value, an alarm message is displayed.
When the body temperature alarm is on, a beep sounds.
Enable or disable the Alarm.
Change the temperature display format to Celsius (℃) or
Fahrenheit (℉).
It set the operation of the fan for heat dissipation.
Measure your body temperature and check whether wear a
mask or not. When a person without a mask is detected,
display a no-access sign and you can hear the voice.
When it detects a person who is not registered in the
database, it notifies them that it is a stranger.
When a stranger is detected, the captured picture is saved
separately.
Description
8