AHA Smart Pass FPS-1000R User Manual page 15

(12) Relay setting
Set relay mode and delay time
Relay is a kind of switch and operates according to the mode setting as follows.
Relay mode is used to operate the external door lock, warning light, alarm buzzer, etc.
according to the recognition result.
Maximum driving current and voltage: 2A 30VDC, 0.28A 220VAC
Excessive use of the maximum drive current and voltage may cause product defects.
Mode
No.
1 Mode 0
2 Mode 1
3 Mode 2
Delay
4
time
Disable relay
When the relay is open, it is closed for the set 'delay time' and
then opened again.
The relay is closed and opened for the set "delay time" and
then closed again.
Set the operation time of the relay.
The initial value is 5 seconds, and the setting is from 0 to 63
seconds.
Description
15