BATHROOM SCALE
FOR THE PURPOSE OF USING CORRECTLY AND MAINTAINING WEIGHT ACCURACY AND LONGEVITY OF BODY SCALE, PLEASE READ
FOLLOWING INSTRUCTION CAREFULLY BEFORE OPERATING.
SPECIFICATIONS:
Maximum weight capacity: 150kg
Minimum measurable weight: 2.5kg/5.51bs/0.4st
Graduation: 0.1KG/0.21bs
User selectable units: kg/lb/st
Low-battery indicator: LO
Overload indicator: EEEE
Operating temperature: 5°C~ 40°C
INSTRUCTIONS FOR USE:
1. Place one CR2032 Lithium battery in the battery seat of the back of scale
2. Choice the weight unit and place the scale in right position. The scale must be placed on smooth hard floor.
3. Turn on the scale by standing on the scale directly
4. Always stand in the center of the platform, enabling the scale to measure your weight exactly.
5. Within seconds, personal weight is established electronically and shall be displayed.
6. Once you step o the scale, it will switch itself o automatically a er few seconds.
TROUBLESHOOTING:
1. Display "EEEE" - if weight exceeds the maximum capacity of 150kg/3301bs/23.6st. "EEEE"
Appears on the display, Please step o the scale immediately, otherwise the scale may be damaged.
2. Display "Lo" - Low battery. The user is advised to replace a pair of new battery.
PRECAUTIOUS:
1. Avoid overload, other wise, permanent damage may occur to the scale.
2. Do not disassemble the product other than replacing the battery.
3. Clean a er use with a lightly damper cloth, do not use solvents or immerse the products in water.
4. Avoid excessive impact or vibration to the unit. Be ware not to drop it to the floor.
5. Do not put the scale on so floor (e.i. carpet), otherwise the measure is inaccurate.
6. Do not put any other things on the glass platform if you not use.
IMPORTANT: REMOVE THE PLASTIC UNDER THE BATTERY
Need help?
Do you have a question about the BH-9006 and is the answer not in the manual?
Questions and answers