Advertisement
Quick Links
LAY OUT
Water Weight Instructions
Two water weights are to be attached to each leg of inflatable.
1.
Insert the one way valve into the main
value, screw until finger tight. Ensure the
valve cap is open.
EMX ALPHA INSTRUCTIONS
Inflation & Deflation
ACCESSORIES
2.
Insert hose into the one way valve, turn
water on at tap and begin to fill the water
weight. Fill the water weight until firm.
www.extremecanopy.com admin@extremecanopy.com (888) 201 1968
INFLATION
SECURING
ENJOY
3.
Once full turn tap off and remove hose.
Close the valve cap and screw until
finger tight. Zip the water weight cover
Advertisement
Related Manuals for Extreme Canopy EMX ALPHA
Summary of Contents for Extreme Canopy EMX ALPHA
- Page 1 EMX ALPHA INSTRUCTIONS Inflation & Deflation LAY OUT ACCESSORIES INFLATION SECURING ENJOY Water Weight Instructions Two water weights are to be attached to each leg of inflatable. Insert the one way valve into the main Insert hose into the one way valve, turn Once full turn tap off and remove hose.
- Page 2 EMX ALPHA INSTRUCTIONS Inflation Instructions WARNING READ INSTRUCTIONS CAREFULLY BEFORE USE Remove inflatable tent from Roll out the inflatable tent. Lay the inflatable tent out flat & extend protective cover. all legs. Layout walls and awning. Confirm Each leg on the inflatable tent has a valve.
- Page 3 EMX ALPHA INSTRUCTIONS Deflation Instructions WARNING READ INSTRUCTIONS CAREFULLY BEFORE USE Remove stakes and guide ropes or Ensure area is clear of persons. Remove all air from the tubes. detach sandbags. Ensure area is dry and clean. Unscrew all valves to deflate tent.
Need help?
Do you have a question about the EMX ALPHA and is the answer not in the manual?
Questions and answers