Monitor Section - Samson XM410 Owner's Manual

Controls and Functions
FRONT PANEL CONTROLS

MONITOR SECTION

The XM410 has two internal power amplifiers and depending on the MODE selection switch, the
amplifiers received their input signals from
the MAIN or MONITOR bus. The following
section describes the MONITOR bus opera-
tion, which allows you to adjust the overall
tone and volume, and specify the mix level
of the built-in effects:
EFX RETURN - Effects Return Control
15
The EFX RETURN control is used to adjust
the level of the effect sound being sent
back from the built-in digital effect to the
MONITOR bus. This allows you to hear the
DSP effects in your monitor speakers.
16
MASTER - Volume Control
The MASTER level control is the overall
control for the MONITOR bus. The MONITOR
level affects both the MONITOR bus signal
which is sent to the monitor speakers and
the line level signal which is sent from the
MONITOR OUT jack.
17
MONITOR Level Meter
The OUTPUT LEVEL METER allows you to monitor the level of the signal which is being sent to the
MONITOR OUT jack and MONITOR POWER AMPLIFIER.
NOTE: To avoid distortion, adjust the VOLUME level control so that the 0 indicator LED lights occa-
sionally.
8