Installation; The Miele Waterproof System; Water Inlet - Miele G 5000 Operating Instructions Manual

Installation

The Miele Waterproof system

Provided that your dishwasher has
been installed correctly, the Miele Wa-
terproof system will protect you from
water damage throughout its lifetime.

Water inlet


Danger to health due to wash
water.
Water in the dishwasher is not drink-
ing water.
Do not drink any water from the dish-
washer.

Health risk and risk of damage
due to contaminated incoming water.
The quality of the incoming water
must correspond to the drinking wa-
ter specification of the country in
which the dishwasher is being oper-
ated.
Connect the dishwasher to a drinking
water supply.
82
The dishwasher may be connected to
cold or hot water (up to max. 65 °C)
supplies.
If energy-saving water heating sources
such as solar energy circulation sys-
tems are used, we recommend con-
necting to the hot water connection.
This saves both time and electrical en-
ergy costs. Hot water is used in all pro-
grammes.
The water inlet hose is approx. 1.5 m
long. A 1.5 m long, flexible metal exten-
sion hose (tested to
14,000 kPa/140 bar) is available as an
optional accessory from Miele specialist
retailers or the Miele Customer Service
Department.