Programme options
Factory defaults
If you have altered any settings, you
can reset them back to the factory de-
fault settings.
Switch the dishwasher off with the
button, if it is switched on.
Press the Start button in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep the Start button pressed in for
at least 4 seconds until the Start in-
dicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
58
Press the programme selection
button 19 times.
The left programme indicator light will
emit 1 long flash and 9 short flashes at
intervals.
The flashing sequence in the display in-
dicates whether the setting deviates
from the factory default:
- : All values are factory default set-
tings.
- : At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the Start but-
ton.
The setting is now saved.
Switch the dishwasher off with the
button.