Subscribe to Our Youtube Channel
Related Manuals for Gbord EN-101
Summary of Contents for Gbord EN-101
- Page 1 EN-101 Intel PCIe 10G 5-Speed Multi-Gigabit NIC User’s Manual Ed – 29 May 2019...
- Page 2 This equipment has been tested and found to comply information and technical support. with the limits for a Class A digital device, pursuant to http://www.gbord.com/ Part 15 of the FCC Rules. These limits are designed to Copyright and Trademarks provide...
-
Page 3: Table Of Contents
Table of Contents Chapter 1: Introduction ......................... 4 1.1 Module Physical Features ......................4 1.2 System Requirements ........................5 1.3 Package contents ........................5 Chapter 2: Installation ........................... 6 2.1 Hardware Layout .......................... 6 2.2 Hardware Installation ........................7 2.3 Driver Installation ........................7... -
Page 4: Chapter 1: Introduction
Chapter 1: Introduction This 10Gbase-T network card (NIC) lets you add one RJ45 port to your server or desktop computer and access your network at multiple speeds: 10G, 5G, 2.5G, 1G and 100Mbps. Compliant with IEEE 802.3u/ab/an and IEEE P802.3bz standards, the network card delivers a dependable way to upgrade or replace your existing network ports with one 100Mbps/1G/2.5G/5G/10G compatible RJ45 port, providing throughput capability of up 10Gbps in each direction (20Gbps total). -
Page 5: System Requirements
1.2 System Requirements Hardware The following system specs are recommended minimum PCIe slot: Available 4-Lanes PCI-Express slot gen 2.0 or later Processor: Quad Core 3.0GHz or higher RAM: 4GB memory or higher Software Operating systems supported Windows 7 (64-bit) ... -
Page 6: Chapter 2: Installation
Chapter 2: Getting Started 2.1 Hardware Layout Link/Activity Indicator: When the LED is off, there is no link between the 10Gbase-T network card and the network When the LED is on, a link is established, but there is no traffic on the network ... -
Page 7: Hardware Installation
2.2 Hardware Installation Turn off the power to your computer. Unplug the power cord and remove your computer’s cover. III. Remove the slot bracket from an available PCIe slot. IV. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. - Page 8 Please click “PCIe Intel” to start the installation. Follow the instructions on screen to install the driver. Installation for Linux Insert the provided CD into your CD-ROM drive. Extract the compressed driver source file to a certain directory by the following command: (Please copy the driver file “ixgbe-x.x.x.tar.gz”...
Need help?
Do you have a question about the EN-101 and is the answer not in the manual?
Questions and answers