FlashLogic FLCAN Install Manual page 12

iNstall Guide
Page 12 of 12
WARNING: READ BEfoRE REMoTE STARTING THE VEHICLE
IMPORTANT
I All vehicle doors must be closed and locked prior to remote start sequence. Failure to comply will result in remote starter malfunction.
PUSH To START VEHICLE TAKE oVER PRoCEDURE - To THE VEHICLE oWNER
NOTE
I All vehicle doors must be closed and locked prior to remote
start sequence.
TIME RESTRICTIN COMING UP !

1
www.flash-it.com
FLC-AL(DL)-MA2-EN
Press UNLOCK on after-market
remote.
NoTICE
2
3
!
Failure to follow procedure within time restriction will
result in vehicle engine shutdown.
ALL IN ONE
Mazda
20130227
Doc. No.: ##11050##
TIME RESTRICTIN
Within 45 SECONDS from
previous step:
Open vehicle door.
Enter vehicle.
Close vehicle door.
Press and release BRAKE pedal.
Push to Start vehicle take over
procedure completed.
audiovox electronics corp. © 2013